1936 Panther 350cc


As previously on all my restorations I find it helpful to record photographically state of bike before I commence restoration


This photo shows my other bikes and as can be seen the Panther is in reasonable condition a series of different photos with more detail

Bike is in good condition will make restoration relatively simple

 As always photos have been taken to record original condition and to assist in rebuild  





I thought I would commence with refurbishment of the gear box. There is no cover for the kick start mechanism so will have to make myself

Digital StillCamera

Top insert was only used to use as template for hole size for clutch operating mechanism

Digital StillCamera

Showing kick start spring, innovative thinking was required to determine how to tension spring. This was achieved by removing the pressed sleeve which restrained the kick start quadrant this prented a problem as it was now free to rotate on shaft, overcame this by drilling and tapping  kick start lever and inserting holding screws which were manufactured from 1/4 inch rod and threading with die to 1/4inch British Cycle thread.

The spring was tensioned by rotating and then inserting stop bolt the end result is seen below.



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s